The situation is extremely offensive, but at the same time very typical - the smartphone slipped out of hands and fell into a puddle. Or it was raining. But in life there are situations when there are no worries for a person, and a catastrophe happens for his most important device. But do not be discouraged, there is a solution to these problems.

What to do when water gets into your smartphone

If water has penetrated the smartphone, then you do not need to twitch and test the device for strength, including, shaking, what is urine. Even if you fell under heavy rain, a car sprayed you, you should think about prevention or rescue. Moreover, the first actions should be quick, almost instant.

Switch off. To make out. Get the battery (only removable option) and a SIM card. These measures immediately eliminate the possibility of shorting and ignition. Most of all, these are the sources of power supply, so the first attention is the battery. Dry the battery and put it in a dry, safe place.

If the phone has an external memory card, it also needs to be removed and wiped, as well as a SIM card. Turning on the phone is strictly prohibited without cleaning and drying.

Cleaning the smartphone case

The next step is to remove all moisture from the case. Water enters the smartphone, primarily through the holes for charging, headphones, a USB port. Therefore, we pay attention to these places. Using a clean cloth, wipe thoroughly and blot all wet areas.

In this case, it is very important not to use paper and long-haired fabric. Paper, especially napkins, swells almost immediately under the influence of water and begins to collapse. So you can clog all the smallest troughs and holes inside the smartphone with fibers, and thereby ruin the device faster than water does. A long pile will cling, it can damage the delicate mechanism of the phone.

Only plastic parts of the body can be rubbed inside. Everything else is better to gently, effortlessly, blot.

Deep cleaning mechanisms

No hot air inside the phone. Firstly, there is a risk of molten parts. Secondly, you need to think that a stream of hot air supplied with a certain speed will do with the display. And the smartphone has “brains” - a processor. After all, they try to cool it even in large computers. But here, on the contrary, they will fry.

The only thing you can try is a vacuum cleaner. The nozzle needs to be kept at a distance, to draw out air no more than 10 minutes. But this is still a risk.

Remember: all mechanical influences on the inside of a smartphone carry the risk of damage to the device.

Long drying

After disassembling the smartphone and pre-cleaning from visible drops, the turn of long drying in rice comes.

Why in rice: firstly, it is hygroscopic, and absorbs moisture well even from raw air. And if she remains in the phone, she will certainly pull it out. And secondly, rice will not clog the inside of the phone. The flour is also hygroscopic, and cotton wool. But these materials can not be drained out categorically.

Putting the device in rice, it must be periodically rotated and moved to areas of drier rice. Keep at least 24 hours.

Remember: disassembling the phone consists only in removing the back cover, battery and memory cards. Other manipulations, in an attempt to fix the device, are prohibited. So you only spoil everything, but do not fix it.

After a day of drying in rice, you can assemble the machine and turn it on. If the phone does not show signs of life, then immediately go to the service.

A smartphone that has been in the water can be saved if only reasonable, reasonable steps are taken.Panic, confusion, the desire to fix everything at once is the direct path of the smartphone to the scrap.