The health and well-being of the child is a kind of guarantee of peace and well-being of the whole family. To guarantee a good microclimate in the nursery and to prevent inconvenience or injury, you need to know which heater is best for an apartment with a small child. Today in the market you can buy a variety of classes of devices. They have their advantages and disadvantages, so we will consider the rating of utility below, as the attractiveness and security increase.
Fan heaters
Fan heaters belong to the most widespread, inexpensive and numerous market segment. Their advantages are weighty:
- You can choose a device that will work extremely stably, equipped with a cylindrical turbine;
- the cost of solutions is small;
- security level is high.
However, in a children's fan heater requires constant supervision. It is necessary:
- make sure that the child does not stick foreign objects into the gaps of the gratings;
- falling to the side can lead to malfunctions;
- closing the air intakes causes overheating;
- water ingestion is fraught with a short circuit, the appearance of an open flame, electrical injuries.
Therefore, for a children's room, fan heaters are of little use. An exception can be made only for industrial options, floor heating systems that are protected from moisture, have perfect control systems, and their overall dimensions are such that it is simply difficult for a child to knock them over.
The noticeable disadvantages of fan heaters include a somewhat high noise, as well as the smell that is formed when dust particles get into and burn out of air onto a heated spiral. In addition, heaters of this class burn oxygen in the room. This applies to a lesser extent to modern fan heaters with a cyclone turbine and a system of low-temperature elements, however, this drawback is weight if the device is installed in a nursery.
Oil heaters
An oil heater is a very acceptable option for constant 24-hour children's heating. Expensive models in maximum mode consume a lot of electricity, however:
- in an operating mode with a relatively stable oil temperature, switching on the device is rather rare;
- switching to economy mode is always available; it is easy to choose your own option for a comfortable temperature in the room;
- the automation is reliable, the heater is economical, does not require intervention;
- a large mass model is difficult to overturn accidentally;
- protection systems are reliable, even covering the device does not cause accidents.
But there are undoubted disadvantages of this class of devices. Minor include long warm-up and high power consumption before entering the operating mode. But the most important thing is that the heated elements are open and accessible, the child can get burned, especially if he touches the zone of location of the heating elements.
Oil heater somewhat dries the air. However, this lack of model with humidifiers. In the simplest version, a tank of water is located at the top of the heater. In complex models, the humidification system is equipped with a low-power fan. Aromatic oils can be added to the liquid, including those that are healthy, respiratory.
We offer to read in our article which is better fan heater or oil heater.
Convectors
Convector systems are the most complex and proven solution. It is hard to call it the best because of the high price and the presence of some shortcomings. But the option of using not electricity but gas fuel can make convector most attractive for equipping a nursery and other rooms in a private house.
Gas-fired systems are miniature self-contained heating boilers. Fuel to such convectors comes through thin copper tubes laid in baseboards. And the exhaust and air intake takes place outside: in the wall at the installation site of the system, a hole is drilled to output the pipe.
There are two engineering options for convectors:
- the panel can be open and form a uniformly heated surface without the extremely hot areas that distinguish oil heaters. This is what the “glass panel” convectors look like. They work like infrared heaters;
- the heating unit can be surrounded by a protective housing, while heat is released through air. The operation is similar to the mechanics of the functioning of the heating radiator.
The last version of the convector is the safest for the child. No chance of personal injury or access to electrical parts. However, the convector dries the air and can emit unpleasant odors due to dust accumulating in the heating zone.
Film heaters
Carbon film systems are an excellent heater for a child’s room. Their advantages are extremely compact sizes, low price, the availability of different versions. Today you can buy or order for individual production:
- comfortable rugs of any size;
- wall panels;
- bedding under the carpet, laminate.
The location of the film heater in the form of a rug or mat creates a warm and comfortable place for children to play. In this case, the temperature in the room will also be maintained at a comfortable level - convection from the floor maximally covers the space. There is no danger to the health of the child, the film heater works in two modes: 35-40 degrees and 60-70, which makes it possible to intensively warm the room when the children are not sitting on the floor.
Film resistor systems made by in the form of paintings or door decor, look great indoors. They are the safest - the weak point of the floor options in the form of a low-voltage power cable is fixed and protected here. In addition, the absence of a shell in the form of carpet or mat sheathing allows film wall systems to act as an infrared emitter, heating objects in the room.
In general, if the question is solved, how to choose a heater for a small apartment with a small child, film heaters in wall and floor versions will be an excellent solution. The price of equipping a room will be attractive, while no harm to the health of a small person is observed. Electrical safety is also at a high level: the power of a good film heater is 12V, so even breaking or damaging the cable during games will not lead to trouble.
Infrared emitters
An expensive and fully meeting the needs of safety and the absence of harm to health is quartz infrared emitters. However, when choosing such a heater, it is worth considering the possibility of troubles. For instance:
- emitters mounted on high legs are easy to “drop”;
- heaters suspended on walls in a child’s direct access zone can cause burns;
- water entering the hot element of the system causes an accident;
- the device must not be covered;
- close exposure to infrared radiation threatens overheating and discomfort to a person, objects can catch fire.
But today you can buy ceiling mount systems or designed for installation in the zone of convergence of the wall and ceiling. They will be inaccessible to children, and the heat source is far away and will not have a noticeable effect that causes discomfort.
Infrared emitters economical, reliable, do not burn oxygen. However, the air is dried.But the high level of security makes them an ideal solution for a kindergarten or a large room in an apartment.
In this article, you can learn in detail what is better infrared heater or convector.
Conclusion
Of all the options, if you want to guarantee the health and safety of the child, really only three can be preferred. Heater for children in the form of gas convector attractive for owners of private homes with autonomous heating or apartments, where the installation of such systems is allowed. With minimal investment, film heaters will show excellent results. Electric convectors and infrared emitters are a good solution, which, however, will require high costs for the purchase of equipment and put a strain on wiring and wallet.
We also recommend that you read the article that describes choosing the safest heater.
